 |
Ultra[tm] 10 Workstation: Hardware Specifications
Front View
|
Front Open View |
Left View
|
Rear View
|
For demanding technical and commercial applications like 3-D modeling,
workstations are the best solution. And the Sun Ultra [tm]10 system sets
new standards for performance and value in a desktop work station.
With 440 MHz and a large 2-MB external cache you get the scalable performance you need.
Sun's Ultra Port Architecture 3-D graphics accelerators Creator3D, Sun Elite3D[tm] m3,
and Sun Elite3D m6, provide the throughput and processing power for high-performance
3-D graphics computing. Additionally, with the available SunPCi[tm] coprocessor card
you can now run your PC productivity applications at native speeds alongside your
UNIX® technical applications for un matched versatility and productivity. And with
the preinstalled 64-bit Solaris[tm]7 Operating Environment software and new graphical
desktop tools for simple setup and management, all that power is easy t use.
A better solution, and a better value the Sun Ultra 10 workstation.
|
Processor
|
| Architecture |
300, 333, 360, or 440-MHz UltraSPARC[tm]-IIi |
| Cache Memory |
16-KB instruction cache, 16-KB data cache
512-KB external cache for 300-MHz processor; 2 MB external cache for
other processors
|
|
Main Memory
|
| Capacities |
Four DIMM slots
Install DIMMs in pairs (16 MB, 32 MB, 64 MB, 128 MB, and 256 MB DIMMs);
quad provides best performance
1 GB maximum
|
| Memory type |
50ns or 60ns 168-pin JEDEC DIMMs, ECC error-correction |
|
Standard Interfaces
|
| Audio |
Four audio ports: headphone(out), line-in, line-out
and microphone(in) using EIA standard 0.125-inch
(3.5-mm) jacks |
| Ethernet |
One ethernet/fast ethernet (10BASE-T/100BASE-T) twisted-pair
standard connector (RJ-45),
self-sensing |
| Graphics |
One graphics port (HD15),
onboard 24-bit frame buffer |
| Keyboard and mouse |
One standard keyboard/mouse port (mini
DIN-8) |
| Parallel |
One IEEE 1284 (bidirectional) parallel port (DB25) |
| PCI |
Four 32-bit PCI slots, full-size, 33 MHz, 5 volt |
| Serial |
One synchronous/asynchronous serial port (DB25);
one asynchronous serial port (DB9) |
| UPA graphics slot |
One 100-MHz UPA graphics slot; supports Creator, Creator3D,and
Elite3D high-performance graphics options |
|
Internal Mass Storage
|
| Disks |
Up to two 4.3 GB (4500 rpm) or 9.1/20.4 GB (7200 rpm),
3.5-in. Enhanced IDE HDD |
| Floppy |
One 3.5-in. 1.44-MB floppy |
| CD-ROM |
24X-, 32X, or 48X-speed CD-ROM |
| Tape |
No tape supported |
|
Environment
|
| AC input |
90 - 132 VAC or 180 - 264 VAC (switch selectable),
47 - 63 Hz, 4 A (max), 0.4 KVA |
| Input power |
380 W |
| Heat output |
1287 BTU/hr |
| Temperature |
Operating: 5° C to 35° C (41° F to
95° F)
Nonoperating: -20° C to 60° C (4° F to 140° F) |
| Humidity |
Operating: 40% to 80% relative humidity, noncondensing
Nonoperating: 30% to 90% relative humidity, noncondensing |
| Altitude |
Operating: 3000 m (10,000 ft)
Nonoperating: 12,000 m (40,000 ft) |
| Acoustic noise |
Operating: 5.2 bels
Idling: 5.2 bels |
| Number of cords |
1 |
| Plug type - U.S. |
NEMA 5-15P |
|
Regulations
Meets or exceeds the following requirements:
|
| Safety |
UL 1950, CSA C22.2 No.950, TUV EN 60950, CB Scheme with Nordic deviations,
EMKO-TSE (74-SEC)203, ZH1/618 |
| RFI/EMI |
FCC Class B, DOC Class B, VCCI Class 2, EN 55022 Class B, EN 61000-3-2 |
| Immunity |
EN 50082-1 |
| X-ray |
DHHS 21 Subchapter J; PTB German X-ray Decree |
| Power management |
Energy Star compliant |
|
Dimensions and Weights
|
| Height |
40.2 cm (15.8 in.) |
| Width |
17.6 cm (6.9 in.) |
| Depth |
43.5 cm (17.1 in.) |
| Weight |
20.0 kg (44 lb.) |
|
Products & Solutions
HPC Servers